Model blog on military aircraft of all periods. Plus general history of aircraft.
Labels
- 127th
- 191st FIG
- 191st FIG History
- 191st FIG.
- a
- A-20 Havoc/Boston
- A-26 Invader
- A-3
- A-4
- A-6 Intrufers
- A-7 Corsair
- A/B-26 Invader
- ADF F-16's 191st Fig
- AIMS Conversions
- airliners
- AM-1 Mauler
- b
- B-17
- B-24 Liberator
- B-25
- B-26 Marauder
- B-47
- B-52
- B-57
- Barry Numerick
- BF-109
- Bf-110
- blogs
- BOH
- Boomerang
- C-118
- C-119
- C-124
- C-130
- C-133
- c-14
- C-47
- C-54
- C/KC-97
- C121/EC 121
- C47/DC3
- Chu Lai RVN
- cold war
- Convair 340/C-131
- curtiss buffalo plant
- DC-8
- decals
- f-100
- F-101 Voodoo
- F-102
- f-104
- F-106
- F-14
- F-15
- F-16
- F-18
- F-20
- F-4 Phantom
- F-4C history
- F-4C Six pack Phantoms
- F-4D
- f-5
- F-8 Crusader
- F-80
- F-84
- f-86
- F-86D
- F-89
- F3H Demon
- F4U Corsair
- FH2 Banshee
- Fury
- FW-190
- FW-190 all variants
- Gunze products
- Hawker Hurricane
- helicopter Vietnam
- i
- in memory of fellow modelers
- Ipms
- IPMS Cons & Nationals
- Japanese aircraft
- JU-87
- JU-88
- KC-135
- KC97-C97
- Keith Ferris Camo Schemes
- KI-61/100
- KMC correction sets
- Korean War
- m
- Meteor fighter.
- MIANG 107th TFS (127th TFG) A-7D
- MIANG aircraft
- MIANG F89C
- Michigan Cold War Nike site
- Mig-`15
- Mig-17
- Mig-19
- modeling memories
- modeling tips
- Mosquito
- my models
- Omaha 2022
- P-2 Neptune
- P-3 Orion
- P-38
- P-39
- P-40
- p-47
- P-51
- Photographing your Models
- Privateer
- RF-84F
- Sea Fury/ Tempest
- SixPack F-106
- spitfire
- t
- T-33
- TBF & TBM torpedo Bomber
- TBM
- Typhoon
- USAF Aces
- Vietnam
- VP93
- War Eagle
- wet decals
- Why didn't my model win?
- WW2 history
- Zero
Thursday, June 18, 2020
Tuesday, June 16, 2020
Arctic Spinter for F-18
the F-18’s Arctic Splinter Camouflage of the VFC-12 “Fighting Omars” at Naval Air Station Oceana Virginia Beach, VA. The paint mask can be found here: Hornet Aggressive artic scheme
Monday, June 15, 2020
How too apply a decal on the A-4 skyhawk. By David Aungst
David has six easy steps to lay down the wing decal over the vertices. This is the bane of building A-4 Skyhawk model.
The Start
The wing vortex generators are very large and on high-viz Skyhawks, you need the national insignia to go over them.
The Start
The wing vortex generators are very large and on high-viz Skyhawks, you need the national insignia to go over them.
Step 1
Apply the decal. Only have the forward section of the decal flat on the wing. Hold the decal up in the back. Stiffer decal will stay up on their own. Thin ones need help. I am using my favorite decals tool (a sewing needle mounted in a wood dowel) to prop up the back of the decal.
Apply the decal. Only have the forward section of the decal flat on the wing. Hold the decal up in the back. Stiffer decal will stay up on their own. Thin ones need help. I am using my favorite decals tool (a sewing needle mounted in a wood dowel) to prop up the back of the decal.
Step 2
With the decal popped up, apply setting solution (I use Solv-a-set) directly on the vortex generators under the decal. Then, let got of the decal. On thin decals, the raised portion will just flop down. On thicker decals, the setting solution will work in the decal from the back side and it will relax down.
Avoid the temptation to "help" it go down. You run the risk of distorting the decal.
Also, try to avoid any air bubbles around the vortex generators. Any air bubbles will make bubbles in the decal that you will later have to pop so the decal lays flat.
With the decal popped up, apply setting solution (I use Solv-a-set) directly on the vortex generators under the decal. Then, let got of the decal. On thin decals, the raised portion will just flop down. On thicker decals, the setting solution will work in the decal from the back side and it will relax down.
Avoid the temptation to "help" it go down. You run the risk of distorting the decal.
Also, try to avoid any air bubbles around the vortex generators. Any air bubbles will make bubbles in the decal that you will later have to pop so the decal lays flat.
Step 3
Now starts the waiting game. All the wrinkles tell you the setting solution is working. As the decal is drying, I will apply more setting solution on the area of the vortex generators to help keep the decal softened. As it drys, the decal is sucked down over the vortex generators.
IMPORTANT - Do not try to flatten the wrinkles out of the decal. This wrinkling is normal and will level out as the decal dries.
Now starts the waiting game. All the wrinkles tell you the setting solution is working. As the decal is drying, I will apply more setting solution on the area of the vortex generators to help keep the decal softened. As it drys, the decal is sucked down over the vortex generators.
IMPORTANT - Do not try to flatten the wrinkles out of the decal. This wrinkling is normal and will level out as the decal dries.
As the solvent continues working, the decal can look really bad. Still, refrain from trying to fix it at this stage.
You can start seeing the decal being pulled down over the vortex generators, here.
You can start seeing the decal being pulled down over the vortex generators, here.
Step 4
The decal is mostly dry/set. Some wrinkles are still present. The decal is getting pulled down over the vortex generators.
The decal is mostly dry/set. Some wrinkles are still present. The decal is getting pulled down over the vortex generators.
Step 5
This is the morning after.
The decal is fully dry/set. You can see that the decal had snuggled down over most of the vortex generators. The ones at the left end are not yet fully pulled down.
This is the morning after.
The decal is fully dry/set. You can see that the decal had snuggled down over most of the vortex generators. The ones at the left end are not yet fully pulled down.
Step 6
Use a tool to poke holes in the decal at the bubble points. Take care not to do too may. These holes are what may create tares in the decal that later need to be fixed with paint.
Then, apply more decal solvent.
Repeat this step as much as you need to until you are done.
Use a tool to poke holes in the decal at the bubble points. Take care not to do too may. These holes are what may create tares in the decal that later need to be fixed with paint.
Then, apply more decal solvent.
Repeat this step as much as you need to until you are done.
Done! The decal has snuggled down over all the vortex generators.
Here is a view without the light reflections. You can see I have a few minor tares in the decal at the base of a few vortex generators to touch-up with paint on the left end. This was where the bubbles were under the decal, so these were expected. The right end vortex generators had the decal suck down around them without bubbles, so they did not need poking (which causes the tares).
Sunday, June 14, 2020
FalkeEins interview Barry Numerick "Mr 109"
Since my eye surgery I have been catching up with the blog I like. One of my favorite is FalkeEins. His 'The Luftwaffe Blog" I consider one of the best luftwaffe history on the internet. Today I just read his article about Barry Numerick.
If you have been to the Nationals and Region 4 IPMS contests you will see Barry's BF-109's proud display on the table in the 1/72 Axis (German) category. Barry BF-109 are like fine crafted jewelry. They are always amazing. Plus they normally win the class.
FalkeEins did a excellent interview with Barry and his BF-109s. The interview can be found here:Building the Bf 109 with award-winning modeler Barry Numerick - Modeler Profile (2)
I guarantee you will enjoy this article. Also Thanks to Neil for listing my blog at the end of the article.
If you have been to the Nationals and Region 4 IPMS contests you will see Barry's BF-109's proud display on the table in the 1/72 Axis (German) category. Barry BF-109 are like fine crafted jewelry. They are always amazing. Plus they normally win the class.
FalkeEins did a excellent interview with Barry and his BF-109s. The interview can be found here:Building the Bf 109 with award-winning modeler Barry Numerick - Modeler Profile (2)
I guarantee you will enjoy this article. Also Thanks to Neil for listing my blog at the end of the article.
Barry's 1/72 BF-109 collection. |
191St Fig F-4C crew chiefs / CAM Sq
Here are the William Tell Crew Chief and support people. The com guys all left the unit in the mid 80's as NWT was turning Detroit Metro into a maintenance. The pay was better than a guard technician's
Names are Back Row: Gordie Graham, John Bullis, Cliff Allen Larry Bishop and John Dyer. Front row is Mike Galea, Ed Gumbko, Paul Chamberlin and Frank Morris.
Com Shop Gordie Graham, John Dyer and Frank Morris.
Photo credit Ed Gumbko.
Weapon crew.
On the left is Jim Flisnik. Jim passed away on April 23,2020. Funny guy
Weapon crew.
On the left is Jim Flisnik. Jim passed away on April 23,2020. Funny guy
Saturday, June 13, 2020
Subscribe to:
Posts (Atom)